News
How to effectively save electricity for electric vehicles
time:2021-12-10
How to effectively save electricity for electric vehicles? Reasonable use of battery vehicles can reasonably save electricity:
The vast majority of electric bicycle batteries at this stage are all lead-acid batteries. The key common problems are as follows:
1. Read the user manual before electric vehicles. Many people don't care. However, some key points and common problems of the instructions are the importance of increasing the service life of the electric vehicle battery.
2. The battery should be charged immediately after use, and it should not be stored for a long time without electricity, otherwise the battery pole pieces will be potassium thiocyanate;
The consciousness of recharging the battery after completely draining the electricity is wrong. The greater the depth of the discharge, the shorter the battery life;
Once the battery is exhausted, it cannot be used again. Many customers have encountered such a situation. The battery forgot to charge the battery. As a result, the battery was completely discharged during the entire application process. Therefore, the method of gradually calling and changing in the middle will be adopted. For this matter, the battery manufacturer suggests that it is not necessary to use this frequently. This kind of method is very harmful to the service life of the battery.
3. When riding a bicycle to save electricity, it is better to ride a bicycle at a medium speed or maintain an average speed. If you want to slow down the road, you should slow down and skating early, and try to avoid using the brake pedal. Screw the ride.
4. It is not necessary to turn the handlebar when riding. After all, the speed is fast, but the motor is also overloaded, resulting in faster consumption! Pay more attention to the power consumption and try to avoid fast charging on the street. The high current of fast charging and air brake will cause more damage to the battery!
5. If the battery is found to be particularly hot while charging, don't charge it again! Go for repairs quickly.
Repair and maintenance of batteries for electric bicycles:
(1) The installation of the battery on the electric bicycle should be firm to prevent the battery from being damaged by vibration during riding.
(2) Always eliminate dust and waste on the battery box, pay attention to keeping the battery dry and clean, to prevent the battery from discharging itself.
(3) The battery does not have to be close to the high temperature pyrogen. In hot season, it is forbidden to expose to the sun immediately (especially pay attention when parking in summer). Pay attention to good natural ventilation when charging the battery.
(4) Just start the electric bicycle, use your foot to boost the start to prevent excessive discharge current from damaging the battery; when riding, be careful not to over-discharge the battery. Over-discharge can easily cause the battery to become seriously dead. , Thereby greatly reducing its service life.
(5) The load of electric bicycles is too large, which will inevitably cause the expansion of the motor current, cause the battery to over discharge, and the initial attenuation coefficient of the battery, which will seriously harm the service life of the battery.
Prev:Teach you how to distinguish between good and bad electric cars